Product Description
Operation Instruction
1000*600 Model Automatic Clapboard Partition Machine
I. Product Parameter
Model |
1000*600 Model |
Machine max speed |
120 / 120 pieces/min |
(×) Max feeding size (L×W) |
1000mm×600mm |
(×) Min feeding size (L×W) |
180mm×140mm |
Min slotting distance |
45 mm |
Slotting number |
9 groups of slotting knives |
Slotting width |
3.5mm 5mm 7mm () (Choose one according to the thickness of paperboard) |
(××) Dimension (Length*Width*Height) |
1500mm×1450mm×1300mm |
III. Machine Operation
- ,(
Choose the corrugated paperboard which you want to process, adjust the side feeding baffle (1 in Picture A) . Adjustment method : loose the screws in circle of below picture, move the two side feeding baffles (1 in Picture A) right or left , adjust the distance between two side baffles according to the length of paperboard , after finishing adjustment , tight the screw and fix the baffles .
,(
When the length of paperboard is big , can move the front feeding baffle (3 in Picture A) right or left. Adjustment method : loose the screws in circle of below picture, move the two front feeding baffles (3 in Picture A), adjust the front feeding baffles to the suitable positions according to the length of paperboard , after finishing adjustment , tight the screw and fix the baffles .
-
Adjust the back feeding baffle (2 in Picture A) , adjustment method : loose the screws in circle of below picture , move the two back feeding baffles (2 in Picture A) forwards or backwards , adjust the suitable positions according to the width of paperboard , after finishing adjustment , tight the screw and fix the baffles .
-
Adjust the feeding clearance according to the thickness of paperboard : loose the screws in circle of below picture , move the front feeding baffles (3 in Picture A) up and down , make the distance between bottom of baffle and feeding table is 1.5 times of the thickness of paperboard . (when feed paperboard , can make the bottom paper pass and stop the second last)
-
Adjust the suction range of feeding table : first put one piece of paperboard on the feeding table , rotate the belt wheel which is with yellow circle in Picture Left , check the walking range of the pushing plate (the rectangle part in Picture Right) . Ensure that the distance between the pushing plate and the paperboard is 2mm when the pushing plate move the extreme edge of machine , then it can push the paperboard and make it feed forwards. If need to adjust the position of pushing plate , loose the screws which are circled in Picture Right , find the suitable position , and fix the pushing plate .
Packaging & Shipping