QHFFG200-2600Flexo 4 Colors Printer
Slotter Folder Gluer Machine
Main specifications:
Technical Specification
| NO |
Parameter name |
Unit |
Specifications |
| 1 |
Machine inside width |
mm |
2800 |
| 2 |
Max speed |
pcs/min |
200 |
| 3 |
Economic speed |
pcs/min |
180 |
| 4 |
Max feeder paper size |
mm |
1200×2600 |
| 5 |
Min paper |
mm |
350×700 |
| 6 |
Max printing size |
mm |
1200×2300 |
| 7 |
Interval one paperboard feeder size |
mm |
1400×2600 |
| 8 |
Color accuracy |
mm |
+0.5 |
| 9 |
Standard plate thickness |
mm |
6-7.2 |
| 10 |
Thickness of the board |
mm |
2--11 |
| 11 |
Minimum slotting spacing |
mm |
300×100×300×100 |
| 12 |
Maximum depth of slotting |
mm |
300 |
1.Feeder Parts:
Machine Clutch:
- Electric control machine cluch with alarm,when moving it will be alarm to make sure the safety.
- Transmission sharft with safety clutch,Avoid wrong actions and damage the machine.
- Pneumatic lock.
- Main motor with start protection device.
Vacuum suction type lead edge feeder system:
- Lead edge feeder can less blocking of the paperboard.
- Belower suction assist feed.Belower quantity can be adjustment.
- Frount flaper and back flaper adopt manual adjust the gap,feeder flaper electric adjust the gap.
- Feeder wheel adopt PU polyurethane,long using life.
- Stuiable for 3ply 5ply 7ply ,inclued E flute.
- With paperboard counting function.
Dust clean device:
- With dust clean device(cleaning brush),for clean paperboard surface and ready for print.
Paperboard feeding roll:
- Seamless steel tube,cover rubber,and balance treatment.
- Downside paperboard transfer roller chrome.
- Paperboard feeding roll up and down adjust range0-12mm.
Control parts(PLC):
- Each unit with 10inch touch screen, easy control.
- Zero point back device
2.Printing unit
Printing roller:
- Steel plate raw materils,surface chrome and grinding treatment.
- Balance treatment
- Printing mounting function
- With foot turn functions
Printing press roller:
- Steel plate raw materils,surface chrome and grinding treatment.
- Balance treatment
- Press roller up and down adjust range0-12mm
- Feeding roll up and down adjust range 0-12mm
Anilox roller:
- Steel pipe surface with Hard chrome plating.
- Mesh uniform,ink supply uniform
- The gap of anilox roller manual adjustment
Rubber roller:
- Steel pipe surface covered abrasion resistant rubber
Paperboard transfer up and down roller:
- Manual adjust the gap of the rollers,range0-13mm
Phase adjustment system:
- Planetary gear system
- Lift and right adjust ment distance 20mm
- Printing roller adopt inverter adjustment,zero and plate adjust fast,high precision
Ink circulation:
- Ink pump circulations,ink supply stable
- Ink suction with strainer
Printing phase fixing devide
3.Slotting unit:
- The device self-locking function, the preload and quick adjustment mechanism ensures the long-term accuracy between the disc and the shaft, and reduces the cracking of the paper when pressing.
- The newly designed preload press wheel is used to protect the paperboard from failure.
- There are buttons, left and right synchronous intersections, electric axial movement, so that the upper and lower pressure line wheels, the upper and lower grooved knives are adjusted synchronously, and the electric adjusting box is highly functional.
- A planetary gear type phase adjustment mechanism with digital display function is used for electric adjustment of the slotting phase and the height of the slotting box.
- The slotting tool with high quality alloy steel is adopted, and the width of the tooth shape blade is 7mm.
- The lubrication and abrasion resistant guide block is configured to ensure the displacement of the pressing wheel and slotting cutter wheel is correct and the durability is increased.
- The operation part of the slotting panel is equipped with paper feed, turn off and main engine electric buttons, which has multi-point adjustment operation function.
Operation control:
- The electric control switch is used to adjust the axial, vertical and box height dimensions of each tool holder.
- Through the paper gap, we use hand mode quick clearance fine adjustment self-locking device.
- Equipped with emergency stop to ensure safety.
Slot phase/high adjustment of box:
- The slotting phase is 360 degrees, with positive and negative adjustment, with fast time and high accuracy.
- Phase zero device to ensure the conformance of slotting position
- The box height adjustment adopts internal gear structure electric adjustment to avoid gear oil contamination.
Scorer Line Wheels:
- High strength wire shaft, shaft diameter, 110mm, surface plating hard chromium.
- Axial synchronous adjustment of the position of the pressing wheel and the slotting cutter disk
Paper splitting / slotting cutter seat:
- The slotting tool thickness is 7mm, the quality alloy steel is heat-treated, the gear slotting machine is made by professional manufacturer to ensure the quality.
- The shaft diameter is 159mm. Surface grinding and chromium plating, moving smoothly
- Axial automatic adjustment of slotting, paper cutter seat, pressing wheel and preload wheel position.
- The slotting tool can move, so it is suitable for producing large size double box.
- The special chip cleaning device is used to reduce the cost and prolong the life.
4.The whole folder gluer department
- The folder gluer machine specifications are based on the specifications of the attached printer slotter machine.
Gluing department:
- Adopt non-stop roller gluing system (optional electronic glue spray) to prevent the glue from solidifying, adapt to 2-12mm thick paperboard gluing, and easy to adjust the amount of glue.
- The paperboard gluing adjust left and right is controlled by the computer to adjust the width.
- The amount of glue can be automatically adapted to the change of machine speed, the glue is evenly distributed, and the belt speed of the upper and lower beams can be adjusted to be consistent with or close to the speed of the slotting machine to prevent paper jam.
The Folding Department:
- The front section of the origami is conveyed by the precise stereotyped guide wheel system, and the rear section is transported by the adsorption belt. This transmission mode is stable for the paperboard walking and does not appear to be deviated.
- High-strength folding beam arm, precision traverse guiding system.
- The origami beam adjusted left and right is controlled by computer , and can also be electrically adjusted.
- The transmission and adsorption motor is controlled by electric motor.
- The size of cardboard scissors is adjusted by belt differential.
Tidying department:
- Extend the paperboard correction time, the cardboard can be tidied multiple times and the bond is firm.
- The pat neat of the cardboard both big and small are adjusted for the computer, and it can also be electrically adjusted.
- After the cardboard is tidied, the output is the suction belt conveying mode.
- The rear unit of tidying department can be electrically adjusted left and right.
Stack paper count tidying department:
- The number of count outputs can be set from 10 to 30 per pack.
- The stacking method is a belt drive stack and a bottom plug stack.
- The cardboard pushed by pneumatic cylinders.
Automatic strapping machine KX-1200
- Automatic packaging line KX-305 is designed for leveling and tying stacks of corrugated boxes. Can work autonomously or in one line with automatic folder- gluing lines FGM or JH. A rotary mechanism is additionally installed, which
- Rotates stacks of finished products 90
- degrees before alignment and tying.
- Max. dimensions of workpieces (mm): 1200 x 1200 x 500;
- Min. dimensions of workpieces (mm): 250 x 320 x 0;
- Max. speed (packs / min): >15;
- Band width (mm): 5, 6 , 8 , 9;
- Binding tape thickness (mm): 0,45 - 0,55;
- Power (without swivel mechanism by 90 °): 2 (KW);
- Overall dimensions (without swivel mechanism): 2600 x 2000 x 760 (мм).
5.Oil supply device:
- Mechanical oil pump (double oil pump oil supply cycle).
- The fuel supply is uniform and the oil level of each group is balanced.
- The closed type spray lubrication system is adopted to ensure the transmission accuracy and life.
6.Gear Driving
Main Gear Driving
- 40Cr alloy steel is made by quenching and tempering and grinding at high frequency.
- The four level accuracy, smooth running, low noise, hardness HRC45-50, long life and small wear can ensure long-term printing accuracy.
Product packaging
Company Information
QH-PACK GROUP CO.,LTD is specialized in manufacturing and export distributing of:
- Corrugated Cardboard Production Line (Corrugator for cardboard making),
- Computerized High Speed Flexo Printer Slotter Die-Cutter (Carton box machine),
- Others Convertion Machines(folder gluer,laminator,stitcher,flatbed die cutter),
- Paper Making Machines(kraft paper,flute&testliner,coating paper,tissue paper),
With 20 years experience of international trade and professional manufacture, plus a professional management and sales team, Quanheng Group has been dedicating on the above field enthusiastically to offer our customers with advanced equipments, competitive price, speedy delivery, and fully after service, so as to create value and winning power for our customers. Backed with strong financial support, talented personnel, sound reputation and high sense of commitment, turnover of QH-PACK has been rising rapidly and is heading to the future healthily and strategically. Businesses have covered CIS, Latin America, Middle East, Europe, North America, Southeast Asia and many other markets.
FAQ
1. who are we?
We are based in Hebei, China, start from 2017,sell to South America(20.00%),Mid East(20.00%),North America(10.00%),Eastern Europe(10.00%),Southeast Asia(5.00%),Africa(5.00%),Oceania(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Northern Europe(5.00%),Southern Europe(3.00%),Domestic Market(3.00%),Central America(2.00%),South Asia(2.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
corrugated cardboard production line,flexo printing slotting rotary die cutting machine,Folder glue machine,Flute lamianting machine,Die cutting and creasing machine
4. why should you buy from us not from other suppliers?
we are the professional manufacturer about the corrugated carton machine, and we have the professional sales part, after sales service trem, cooperate with us is your best choose!!!
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW;
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese
Audited Supplier 
){kind=link}
){kind=link}