| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support, Spare PAR |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Automatic 3 Plys Corrugated Cardboard Production line
|
Model |
Equipment name |
QTY/Set |
Remark |
|
|
|
YV5B |
Hydraulic shaftless mill roll stand |
2 |
The spindle240mm,hyperbola heavy rocker,toothed chuck,multi-disc ventilated disc brakes,hydraulic drive lift,left and right translation,for medium. Rail length6000mm,trolley used 10mm plate welding. |
|
|
|
|
Paper trolley |
4 |
|
||
|
SP-1-600 |
Single Pre-heater (floor) |
1 |
Roller 600mm, including pressure vessel certificate. Electric adjustment angle. The wrap angle can adjust the heated area of the paper within 360°. |
|
|
|
320B |
Single facer |
1 |
Corrugated main roll 320mm, material 48CrMo alloy steel. Independent gearbox, universal joint transmission structure. |
|
|
|
SP-3-600 |
Double preheated |
1 |
Roller 600mm, including pressure vessel certificate. Electric adjustment angle. The wrap angle can adjust the heated area of the paper within 360°.. |
|
|
|
GM-18 |
glue machine |
1 |
Diameter of glue roller269mm,Frequency independent motor drive,PLC control,Machine interface touch screen display. |
|
|
|
ZDF |
Conveyor bridge |
1 |
200mm main beam channels, independent inverter motor drive pull paper feed, adsorption tension. Electric correction. |
|
|
|
HPM |
Double facer machine |
1 |
Drying department 14 heating plates, 4 pressure plate, pneumatic lifting pressure roller, using dense pressure roller. |
|
|
|
FTKM |
Electric adjustment thin blade machine |
1 |
Electric adjustment knife, electric bias, 5 knife 8-wire type, blade made of tungsten alloy steel. |
|
|
|
NC-S120 |
NC Cut off machine |
1 |
Full AC servo control, energy storage brake, spiral knife structure, oil-immersed gear drive, 10.4 inch touch screen display. |
|
|
|
SMA-S |
Stacker |
1 |
Electrically adjust the cardboard size and pneumatically control the lateral output cardboard. |
|
|
|
ZQ |
Steam system |
1 |
Including equipment pipeline valves, steam traps, meters and other steam components, customer-owned heat sources and pipelines. |
|
|
|
ZJZ |
Glue making system |
1 |
Pipeline customers bring their own. The glue making device consists of a carrier tank, a main tank, a storage tank, and a glue pump and a back pump. |
|
|
main technical parameters and requirements in production line
type:WJ120-1800-I type three layer corrugated paperboard production line:
1.MAX. Production width:1800mm
2.Design speed:120m/min
3.Economic speed: 100-110m/min
Note: The line speed test paper shall meet the following requirements :( device surface temperature not lower than 172 ºC above)base Paper grade not lower than B grade Paper moisture content of about:11%±2%
top paper:100-250g/m2 core paper:100--250g/m2
Corrugated paper:100-200g/m2
1.Flute type combination:A ,C, B, E(Or managed by the customer)
2.Steam necessary requirements:
3.Amount of steam2500-3000Kg/Hr 4. Maximum pressure:1.2Mpa
5.Common pressure:0.8-1.1Mpa
6,Power supply:380V 50Hz Three-phase four-wire system
7,The total installed power equipment:about 200KW Actual consumption: about 150KW (full speed)
8,Equipment area: about 52m × 10m × 5m (specific length foundation figure date)
9,Equipment Ejection direction: According to user plant to determine the drive left-or right position
10,Equipment suitability, available A, B, C class domestic or imported raw paper base paper
Customer-owned section
1, steam heating system:proposal with 4000Kg / Hr of a steam boiler pressure:1.25Mpa steam pipeline.
2, air compressed machine,air pipeline,glue conveying pipe.
3, power supply,wires connected to the operation panel and line pipe.
4, water sources,water pipelines,buckets and so on.
5, Water, electricity, gas flush mounting civil foundation.
6, Test with the base paper,corn starch (potato),Industrial use caustic soda,borax and other material.
7, Oil equipment,lubricating oil,hydraulic oil,lubricating grease.
8, installation,commissioning of food, accommodation.And provide installers with the installation.
Q: How does your factory do regarding quality controlling?
1) All raw material we used are environmental-friendly
2) Skillful workers care every details in handling the producing and packing process
3) Quality control department are specially responsible for quality in each process
We produced high quality products by introducing advanced technologies for over 20 years, and our products are also widely exported to many different countries including Russia, the Middle East, Africa, Southeast Asia, EU, etc, earned a high reputation among the customers.
Q:Can I customized the machine from your company?
A: Of course you can,we can manufacture the machine based on your customsized requirement.
){kind=link}